Formulation strategy towards minimizing viscosity mediated negative food effect on disintegration and dissolution of immediate release tablets

Food induced viscosity can delay disintegration and subsequent release of API from solid dosage form which may lead to severe reduction in the bioavailability of BCS type III compounds. Formulations of such tablets need to be optimized in view of this postprandial viscosity factor. In this study, three super disintegrants, croscarmellose sodium (CCS), cross-linked polyvinylpolypyrrolidone (CPD), and sodium starch glycolate (SSG) were assessed for their efficiency under simulated fed state. Tablets containing these disintegrants were compressed at 10 and 30?KN, while taking lactose as a soluble filler. In addition to other compendial tests, disintegration force of these formulations was measured by texture analysis. Comparison of parameters derived from force – time curves revealed a direct relation of maximum disintegration force (F_max) and disintegration force development rate (DFDR) with compressional force in fasted state, whereas an inverse relationship of F_max and DFDR with compressional force was observed in fed state. The gelling tendency of disintegrants influenced the rate of release of API in simulated fed and fasted states when compressional force was changed. These observations recommend the evaluation of formulations in simulated fed state, in the development stage, with an objective of minimizing the negative impact of food induced viscosity on disintegration. Use of disintegrants that act without gelling or can counteract the effect of gelling is recommended for tablet formulations with reduced disintegration time (DT) and mean dissolution time (MDT) in fed state, respectively.     

压水堆堆芯损伤评价系统研究与开发

堆芯损伤评价是反应堆事故后应急评价的重要组成部分。本文在国外文献基础上,结合国内的运行经验,对压水堆堆芯损伤评价进行研究,并开发了相应的软件程序。堆芯损伤评价包括基于堆芯裸露时间、在线监测仪表读数和取样分析数据三种方法。考虑应急实时要求、电厂实际情况与国际经验,本文采用了基于在线监测仪表读数的评价方法,该方法主要是基于堆芯热电偶读数与安全壳辐射监测仪表读数进行评价,其他监测仪表读数进行辅助合理性证实。     

Empirical surveys of frontier applications: a meta‐review

This contribution is the first attempt to systematically review all empirical surveys that so far have been made available in the broad field of efficiency and productivity analysis using frontier estimation methodologies. We provide a systematic bibliometric review on the many empirical surveys in the field of efficiency and productivity analysis, the most relevant concepts, areas, overlaps, and potentials to explore from its introduction to the most recent surveys. We combine the United Nations’ International Standard Industrial Classification (ISIC) taxonomy for the economic activity with the Journal of Economic Literature (JEL) classification system to classify the empirical surveys and to identify the current gaps in the literature. In addition to the most relevant/generic potential areas for applications (according to the United Nation's ISIC), this methodology provides a cluster analysis with the most relevant concepts that have been considered so far (according to the JEL codes). This overview brings an interesting guide for future work to develop the whole field.     

宽带毫米波大规模MIMO系统中低复杂度波束域信道估计

针对宽带毫米波大规模MIMO系统信道估计精度低及实现复杂度较高的问题，在传统支撑检测方案的基础上提出一种基于Gauss-Seidel方法的串行支撑检测（GS-SSD）方案。该方案不使用共同支撑假设，参考串行干扰删除，将整体信道估计问题分解为一系列子问题，每个子问题仅考虑一个信道成分。同时，利用Gauss-Seidel方法近似高复杂度的矩阵求逆。仿真结果表明，相比于基于串行支撑检测（SSD）的方案， GS-SSD方案在将求逆复乘数降低一个数量级的同时可以取得接近SSD方案的信道估计性能。     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

An efficient NFEM for optimal control problems governed by a bilinear state equation

In this paper, a nonconforming finite element method (NFEM) is proposed for the constrained optimal control problems (OCPs) governed by a bilinear state equation. The state and adjoint state are approximated by the nonconforming $E{Q}_1^{rot}$ element, and the control is approximated by the orthogonal projection through the state and adjoint state. Some superclose and superconvergence properties are obtained by full use of the distinguish characters of this $E{Q}_1^{rot}$ element, such as the interpolation operator equals the Ritz projection, and the consistency error is one order higher than its interpolation error in the broken energy norm. Finally, some numerical results are provided to verify the theoretical analysis.     

采用信道估计法的基站VSWR实时检测

为解决无线基站宽带工作频带内电压驻波比(Voltage Standing Wave Ratio,VSWR)的实时测量，提出了一种采用信道估计法的测量方案。该方案实现简单，在基带处理单元高速率位置发送数据，依次抓取射频通道反馈和反射数据，分别求取信道响应序列，结合工厂装备测试数据，计算驻波反射系数和反射点位置。发送信号采用宽带正交频分复用信号，能检测到工作频段内任何频点处的驻波异常。有用信号前加循环前缀，并引入峰值抵消核，能正确检测到多个反射点驻波。仿真结果表明，该方案驻波测量精度和单回波点位置精度达到预期，多回波点测量能抓准外部主要故障点，在基站VSWR实时测量中具有良好的应用前景。     

非对称成对载波多址信号的相位误差分析及幅度改进算法

针对由主站和小站信号同频混合而成的非对称成对载波多址（PCMA）信号解调问题，构建了一种实现此类信号解调的框架。参数估计是非对称PCMA通信系统在实现两路信号分离解调时不可或缺的环节，对于幅度参数估计精度问题，提出一种基于四次方法的搜索式幅度估计算法。首先建立非对称PCMA系统解调模型并作出基本假设，然后对不同假设下的相位误差进行对比并分析相位误差对幅度估计算法的影响，最后提出一种新的幅度估计算法。实验结果表明在相同信噪比（SNR）下，正态相位误差下的小站信号解调性能要劣于其均值条件下的解调性能。当误比特率（BER）在数量级为10^-4时，改进算法下小站信号的解调性能提升了1 dB，说明改进算法优于四次方法。     

Adaptive neural network command filtered backstepping control of pure‐feedback systems in presence of full state constraints

An adaptive neural network (NN) command filtered backstepping control is proposed for the pure‐feedback system subjected to time‐varying output/stated constraints. By introducing a one‐to‐one nonlinear mapping, the obstacle caused by full stated constraints is conquered. The adaptive control law is constructed by command filtered backstepping technology and radial basis function NNs, where only one learning parameter needs to be updated online. The stability analysis via nonlinear small‐gain theorem shows that all the signals in closed‐loop system are semiglobal uniformly ultimately bounded. The simulation examples demonstrate the effectiveness of the proposed control scheme.     

Nonuniform linear array DOA estimation using EM criterion

In this letter, we address the problem of Direction of Arrival (DOA) estimation with nonuniform linear array in the context of sparse Bayesian learning (SBL) framework. The nonuniform array output is deemed as an incomplete-data observation, and a hypothetical uniform linear array output is treated as an unavailable complete-data observation. Then the Expectation-Maximization (EM) criterion is directly utilized to iteratively maximize the expected value of the complete-data log likelihood under the posterior distribution of the latent variable. The novelties of the proposed method lie in its capability of interpolating the actual received data to a virtual uniform linear array, therefore extending the achievable array aperture. Simulation results manifests the superiority of the proposed method over off-the-shelf algorithms, specially on circumstances such as low SNR, insufficient snapshots, and spatially adjacent sources.